Don't want to hijack the other thread. Have an 82 shorelandr trailer that HAD original wiring and plug. It still has original wiring, but I had to put a new plug on it. Four-flat.
The old one had 5 wire connections. It has yellow, green, white, brown/yellow and brown/green (I think, can't remember exactly). I also don't know how they were hooked up to the plug, as I loaned the boat and they dragged unplugged plug, so I could not figure it out...
The new plug (for boat) has simply yellow, green, brown, white, as it was made from a simply extension.
I connected the brown/yellow and brown/green from the trailer to the brown of the plug. Green to green, yellow to yellow and white to ground.
Now all works except the side markeers. I must have messed up, the browns?... Any advice before I simply trial and error it?
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
BoxMN
Don't want to hijack the other thread. Have an 82 shorelandr trailer that HAD original wiring and plug. It still has original wiring, but I had to put a new plug on it. Four-flat.
The old one had 5 wire connections. It has yellow, green, white, brown/yellow and brown/green (I think, can't remember exactly). I also don't know how they were hooked up to the plug, as I loaned the boat and they dragged unplugged plug, so I could not figure it out...
The new plug (for boat) has simply yellow, green, brown, white, as it was made from a simply extension.
I connected the brown/yellow and brown/green from the trailer to the brown of the plug. Green to green, yellow to yellow and white to ground.
Now all works except the side markeers. I must have messed up, the browns?... Any advice before I simply trial and error it?
Thanks much!
Link to comment
Share on other sites
3 answers to this question
Recommended Posts