Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Angel Eye JR


Guest

Recommended Posts

I just received the angle eye Jrs. I can't wait to try them out in NJ. Do you guys place a barrel swivel above the spoon or put a swivel directly onto the hook for best results ? thank you

Link to comment
Share on other sites

Mako, I tie them directly to the loop on top. Because they are lighter then a traditional jigging spoon, they don't see to spin as bad as other jigging spoons do. My dad was fishing them with a swivel the last time we were out and it didn't seem to make a difference. I am sure others will have different opinions. But, I have had great luck tieing them directly.

If you want to include a swivel but don't want it down by the lure, try using a mono leader tied directly with a swivel inline.ScottS

Link to comment
Share on other sites

Try a Rapala knot on the JR ANGLE EYES if you do not wish to use a quick snap.

The loop of the Rapala knot will allow for free motion and more action on the fall.

Try to keep the loop of the Rapala knot to under 1/2" at the split ring.

I like to remove split rings from the top tie point. I feel on lighter spoon style lures, you gain a bit more action by doing so.

(BE-TIP) - If you wish to make smaller lures more flasher friendly in deeper water, add a tiny round glass bead or two, on the line above the lure. A cylindrical object reflects sound waves more easily resulting in a sharper reading with a lower gain setting on your flasher unit. This also adds a bit of sound when you pound a jig to gain a fussy fish's attention.

This trick also works well with the glass beads set between 2 plain split shot weights above a hook, for the real fussy buggers.

Allow a 1/4" of free play above the beads so you get the clatter of the glass off the lead shots. Glow rattle beads are another great option for this lead knocker trick.

Remember Sumo panfish feed heavily on crawfish and they tune in on slatter as a possable meal.

wink.gif


------------------
"Ed on the Red"
Backwater Guiding Service
[email protected]
fishingminnesota.com/ed-on-the-red/

[This message has been edited by Backwater Eddy (edited 02-14-2002).]

Link to comment
Share on other sites

Following the rule of thumb: The less terminal tackle the better, I just tie my line directly to the split ring. The spoon flutters on the fall instead of spinning, so line twist hasn't been a problem for me. And the split ring allows the lure to flutter freely, so I don't worry that I'm tying a relatively stiff knot (Improved clinch). If it were a crank without split ring, I'd tie a loop or flexible knot to allow for more wobble. I do tie the knot on the small portion of the split ring where there's a single layer of ring, rather than where it doubles up. That allows the knot to grab better.

Good luck. I've had good success for Angel Eyes. They're no magic lures (sometimes they're outfished by others, sometimes not) but it's good to have another option in the box.

------------------
Steve ([email protected])

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.