I just put new brakes front and back. But I have no break pressure when you push on the break pedal. It goes to the floor the Break light comes on, on the dash. Take you foot off the break pump the pedal once and the light goes off. I can build a little pressure but not enough to drive it safely. Is there anyway to test the master cylinder? Or is there something else I should be looking at? Thanks for your help?
Wasn't terrible at a state park beach. Antelope island maybe. I wouldn't recommend it as a beach destination tho. Figured I was there, I'm getting in it.
The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there. About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
It's kinda gross with the algae in the summer but I got in it anyway. Wanted to see the increased bouyancy at work. You can kinda tuck yourself into a ball and you'll just float with your head above water. When dry off you look diamond encrusted with the salt.
We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity.
Question
uphill
I just put new brakes front and back. But I have no break pressure when you push on the break pedal. It goes to the floor the Break light comes on, on the dash. Take you foot off the break pump the pedal once and the light goes off. I can build a little pressure but not enough to drive it safely. Is there anyway to test the master cylinder? Or is there something else I should be looking at? Thanks for your help?
Link to comment
Share on other sites
5 answers to this question
Recommended Posts