Hello everyone. 1st time caller, long time listener…
My brothers and I own a 2002, 2025 Lund Pro V Magnum IFS that we purchased from In-Fisherman 2years ago. It was a PWT boat so its seen some water but that’s neither here nor there. This spring when we got her out on the water we noticed that the rear livewell was not filling. When we did a forced fill, the recirculation did not operate. The front livewell works like a champ and the rear one was working fine last fall before putting it up for the winter. It was stored outside (under a canopy) and was properly ‘winterized’.
Everything else is working fine. Did we lose a pump? Is it possibly wiring? Is it something we can fix ourselves or are we headed for a dealer? The nearest dealer is 70 miles away.
😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I can't get logged in here on my laptop but I can on my cellular 😪
we had some nice weather yesterday and this conundrum was driving me crazy so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables, winch ratchet parts, handles, leaf springs etc).
I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.
For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.
I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches. I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.
This kind of stuff usually isn’t the easiest.
I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware. But again, I don’t feel like I can see everything going on there.
Question
bobberbob
Hello everyone. 1st time caller, long time listener…
My brothers and I own a 2002, 2025 Lund Pro V Magnum IFS that we purchased from In-Fisherman 2years ago. It was a PWT boat so its seen some water but that’s neither here nor there. This spring when we got her out on the water we noticed that the rear livewell was not filling. When we did a forced fill, the recirculation did not operate. The front livewell works like a champ and the rear one was working fine last fall before putting it up for the winter. It was stored outside (under a canopy) and was properly ‘winterized’.
Everything else is working fine. Did we lose a pump? Is it possibly wiring? Is it something we can fix ourselves or are we headed for a dealer? The nearest dealer is 70 miles away.
Appreciate any insight any one can provide.
tnx, bobberbob
Link to comment
Share on other sites
3 answers to this question
Recommended Posts