Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

auto painter suggestion


jiggin pig

Question

I am looking for a suggestion on a auto painter around the Red Wing area that is cheap. I am not looking for anything fancy, just something that is better then the spray CAN painted brown primer that is on it now. I got the bomber for a $100. I was also wondering what the cost for a paint job is going roughly.

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

You'll spend more than you want to on paint and materials if you do it yourself or hire a local shop or tech - paint prices have jumped up a bit lately. For a cheap job, I'd look at the MAACO and Earl Scheib franchises, they buy paint in bulk (it'll be one stage enamel at the prices below) and can give you what you're looking for reasonably. I'm assuming you want a simple a one color car, overspray/orange peel/dents/old chips/door jambs and trim issues not critical, etc for $250-350.

They do a decent job for what you pay, but don't expect a three stage pearl finish, or one that looks so deep you'll fall into it grin.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.