Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Meal Worm or Wax Worm??


Recommended Posts

Just thought I would ask what you guys prefer to use?? We usually don't have much of a choice here in Colorado, but I myself prefer a Wax worm. A lot of other guys swear by the Mealies... We used these ones up in Montana that they call mousies (had a little tail on the end...) Also up in Wisconsin/Minnesota they have multicolored ones called EuroLarvae or something like that... Tim

Link to comment
Share on other sites

I like the waxies. Seem to do better for me than the meal worms. Also like to use maggots for perch and crappie but they are expensive (if you can find them. Ordered a
thousand of them over the internet last year
and am going to do that again in about a week. Then will keep for 4-5 weeks if you keep the chilled to just a couple of degrees above freezing.

Link to comment
Share on other sites

I agree, for panfish it's hard to beat the waxies. However for Trout, the mealies are great, especially if you pinch or clip alittle off the bottom. That way, the guts hang out alittle, and there's alot more scent! Trout seem to love it!

Link to comment
Share on other sites

I like mealworms myself. The worms with the tail are a grubworm. I order all of my live bait for icefishing at wholesalebait.com
They are prompt and reasonably priced. I just got a thousand mealies from them and there wasn't one dead one in the whole lot.

Link to comment
Share on other sites

It's a sorry deal sitting here reading these posts on a Friday night, second week of Dec instead of getting ready to icefish Sat. I've been complaining enough about these Xmas parties you'd think she would just "make" me go fishing. Does anybody share my pain?
Oh yea...meal worms or wax worms. Back in the olden days of panfishing wax worms always performed the best for me. I do remember mousies working well but seemed like I always exploded them trying to get them on the hook. As far as trout in the high country, I don't think anything works as well as a jig tipped with a small piece of crawler. I do have a buddy who swears by meal worms. My problem with those is that he keeps them thawed between his cheek and gum and often gets them mixed with his sunflower seeds. Yuck!

Link to comment
Share on other sites

Well, I Iike the whole worm debate but I have success with a chartruese jig foremost. Sometimes it is tipped with powerbait...sometimes worm or mealworm. The common ingredient has been a chartruese jig. This is for bows. For Pike or Lakers it appears something shiny or glowing tipped with sucker meat. That is my $.02 worth.

------------------
lucky7

Link to comment
Share on other sites

I caught a sucker icefishing on Grand Mesa a coupla years ago on a night crawler. Musta been too close to the bottom. I let it lie in the snow for at least 2 hours (I was gonna cut it up for lakers for Blue Mesa) and when i got home to clean the other fish i caught, the thing was still wigglin. I took it out to the wife's small garden pond and placed ( actually just tossed ) it in. Old "Buttlips" is still with us. The grandkids love him and the old goldfish put up with him too

Link to comment
Share on other sites

Cool story, I've also have had lake trout that I've caught and put on ice for a few hours and even after they have almost completely frozen nursed them back to life. Have you ever caught any big lakers out of Blue Mesa?

Link to comment
Share on other sites

i always try to support our local bait shops around south denver as much as possible, however, they carry meal, wax, and "super worms" at petco just in case you cant make the tackle store before they close. personally, i have better results with waxworms on a teardrop jig (usually red) while my partner prefers mealys on a tube. this season im looking at ways to use shrimp of some kind, any suggestions?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.