Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

1.22.18 Sunset Lodge Fishing Report, nw Angle of low


Recommended Posts

1.22.18 Sunset Lodge Fishing Report

 

Hello from the NW Angle!

 

Minnesota walleye fishing has been consistent between 18-21 feet. The most effective method is on the dead stick set slightly above the jigging rod. 25-28 feet is also filling buckets with a good walleye and sauger mix, even the occasional jumbo perch. Slender and Tundra spoons have been bringing fish to the house. We have also seen numerous northern pike this week with the largest being over 42.”

 

Canadian walleye fishing remain excellent, especially along points and reefs. Crappie action has been hit or miss. The bite has been better in the morning with anglers limiting out in the first few hours. Fishing deeper than 28 feet is important to get good action.

 

Until next week,

 

Sunset Lodge

26230315_10215942087011250_5526306170613472877_n.jpg

19575212_1582392981844144_4689914938967350993_o.jpg

26758305_1650254288387939_5194474564761207208_o.jpg

26840964_10155174745838461_5701682413551322940_o.jpg

26850049_1582393038510805_7449784318837498950_o.jpg

26903689_1582393111844131_5574111205261905333_n.jpg

26910188_1582392861844156_4324901161898921713_o.jpg

26910704_1582392938510815_2768760793296436552_o.jpg

26951959_1582392785177497_7337955691850699468_o.jpg

26952313_1582392805177495_2121054519528953012_o.jpg

26952567_10155842498387349_9137277180203022150_o.jpg

26961608_1580691552014287_4728857083283873192_o.jpg

27021803_1582393075177468_3954753911782444935_o.jpg

0120181510b.JPG

asd.jpg

asdf.jpg

ddd.jpg

fds.jpg

IMG_4009.jpg

IMG_4014.jpg

sdfsd.jpg

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.