Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

ice castle crank up dish direct TV help


dirt292lv

Recommended Posts

Just got direct TV and can't figure out how to get it to work know it I know it does because they set it up in my yard just can't get the signal meter on the TV to do anything tried googling it but can just find dish and complaining about only contain channels not coming in

Link to comment
Share on other sites

Ya have to find north with a compas first. I downloaded one on my fone. then turn the balck aroow on the satalight dial to north, give the dish about 17 cranks up. then you have to rotate the dish till you find signal, then lock it in.You might have to adjust a crank or to up or down, u also have to swith to the right dish on the TV. Its in sattelset up my wife dose this so im still learning. but you have to switch the selection to the proper dish, at home you have probably a 17 inch oval, and yoiur dish on the house is probabley 8 inch round. thats the first ting you must do. it takes some doing. right everything down as you did once you get so you remember. Hope this gives you direction.

Link to comment
Share on other sites

Yes on my fish house winegard 18" round dish thanks what app by chance do you have I got the box set up but trying to find the satellite is a pain point the north to north and set up the arrow around 185 to 190 but still nothing I'm going to try again tomorrow with a buddy hope we get it figured out

Link to comment
Share on other sites

Check all coax connections. Common cause of frustration. Don't be too confident you know where north is. You should have good idea in your driveway but only a couple degrees is make or break. Even more difficult on the the lake. Especially on a new lake in cloudy conditions. I take a guess on direction but trust my elevation indicator. 37 degrees always gets me some signal even though 185ish often ends up nowhere near my guestimate.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.