Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Engine Oil

Fish Head

Asked by Fish Head,

 Share

Question

Fish Head Mentor

Fish Head

Posted
Posted

I have a 2005 140 Suzuki outboard. The manufacturer calls for 10w-40 oil. For the first time since it was new, I used someone other than the dealer to change my oil and I see from the invoice that they used 10w-30. Is that an issue?

Link to comment
Share on other sites

7 answers to this question

Recommended Posts

  • 0
delcecchi Grand Master

delcecchi

Posted
Posted

I have a 2005 140 Suzuki outboard. The manufacturer calls for 10w-40 oil. For the first time since it was new, I used someone other than the dealer to change my oil and I see from the invoice that they used 10w-30. Is that an issue?

Personally I would be inclined to either take it back and get the right stuff or drain out the 10W30 and put in 10w-40 myself. Losing oil pressure due to oil that is too thin at high temperature would bite, so far as I am concerned. Why risk the motor over less than 20 bucks worth of oil. (I assume not Suzuki oil)

Link to comment
Share on other sites
  • 0
CaptainMusky Grand Master

CaptainMusky

Posted
Posted

Right the shop that changed the oil should out what is recommended by the manufacturer. Their mistake not yours make them replace it. They will probably say something like "that's a misprint on the invoice" and they put the right stuff in. That is when you do your business elsewhere. No excuse since its clearly printed right on the fill cap.

Link to comment
Share on other sites
  • 0
Fish Head Mentor

Fish Head

Posted
  • Author
Posted

Right the shop that changed the oil should out what is recommended by the manufacturer. Their mistake not yours make them replace it. They will probably say something like "that's a misprint on the invoice" and they put the right stuff in. That is when you do your business elsewhere. No excuse since its clearly printed right on the fill cap.

That is exactly what they said. They better be right! I hate to think I'm riding around with thinner oil than whats recommended.

Link to comment
Share on other sites
  • 0
delcecchi Grand Master

delcecchi

Posted
Posted

Some place on Vermilion? If so I would appreciate knowing who. PM if you don't want to post.

I would be tempted to drain what they put in and put in what I knew to be right. The peace of mind is worth quite a bit to me.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to question listing


  • Your Responses - Share & Have Fun :)

    • rundrave
      Problems with Yetti

      By rundrave · Posted

      got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • Macgyver55
      Random Daily Pics

      By Macgyver55 · Posted

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept