Terrova Universal sonar again...now to a Marcum?

[Mlaker3]

I would like to run the US2 trandsducer to a Marcum LX3 flasher in the bow. Didn't get much help from Cabela's or Minnkota. Only curious about depth and weeds when I'm in the bow. Has anybody had any luck going this way? Did you have to make/splice an adapter? Thanks ahead

[h8go4s]

Either strap your Marcum ducer onto the Terrova or get one of these and an adapter cable for $100 total.

http://www.humminbird.com/Products/PiranhaMax-143/

[Brad B]

there is no adapter cable at this time to hook a marcum to the us2 transducer. the only way you could use a marcum on a trolling motor is to buy the puck transducer and put that on the outside of the motor. if you are set on using a flasher then you would need to get a Vexilar. Vexilar does make a adapter for their flasher to be hooked up to the us2 transducer. I would recommend the FL-18 since it is the only one besides the Fl-22 that offers bottom lock. will be sending you a PM so watch watch for it.