Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Buick Riviera Problems

nobody05
 Share

Recommended Posts

nobody05 Community Regular

nobody05

Posted
Posted

Hey all. I have a 1990 Buick Riviera 3.8l Series 1 that has recently giving me a headach. I pulled a code 42 and a 47 off of it the SES soon light is on.What them codes mean Ive had no luck looking online. It has got a engine misfire. More so on high RPM under full load or low RPM like Overdrive you feel the shimy of the misfire going up a small hill. I recently have put a coil pack, coil pack moduel, Plug Wires & Plugs & New Fuel Filter. With the problem still there. Anything else there to look into guys?

I will say this whether it has nothing to do with it or not, this seems to me started after going through a automatic car wash.

Link to comment
Share on other sites
luckycrank Experienced

luckycrank

Posted
Posted

code 42 is a genaric code for low voltage for your igniton module < why did you replaced it ? was this before or after noticed the missfire ? code 47 is you a/c clutch circuit also cruise control from what I understand. i would look at your installation of your ign module . did you bend a pin at the harness or something along those linesor ground a wire. ?

Link to comment
Share on other sites
nobody05 Community Regular

nobody05

Posted
  • Author
Posted

That is the symptoms that I went to Napa with. First my plugs were overdue and I know this along with the wires. Replaced them. Went back to napa and then thats when I put on the coil pack and module. Problem was resolved for maybe 1k miles. Problem is now back

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • Macgyver55
      Random Daily Pics

      By Macgyver55 · Posted

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept