Need help on my Warrior boat livewell pumps

[KrappieKilla]

Here is a boat riddle.

I have a Warrior Eagle V177 Tiller. For 1 the thing is awesome. But in the fall (before river fishing season and possible ice up of pumps) both my livewell pumps stopped working. I think it is just a fuse (or a different power issue) since the lights don't come on and I know it is common to blow them if anything is getting clogged in your intake. No lights come on on either the front or rear instrument cluster panel livewell switches.

So I went looking everywhere in the boat for the fuse on these but to no avail. I assume it is an in-line 2 amp fuse (I believe the pumps are attwood A500's with 2 amp fuses). Does anyone know where these fuses might be?

There is one 2 amp fuse connected right by the big motor batteries to a wire that goes deep into the floor somewhere. The fuse seemed fine but maybe a little corroded, I cleaned it but have not yet replaced it.

Also, everything else on the boat electronics wise is working perfect. Thanks for your time and help.

[Borch]

My warrior 1890 has small circuits that pop and push in to reset located under the toggle switches on the panel. They should be labeled, at least mine are.

[KrappieKilla]

Yes mine has those too, I forgot to mention that mine had never popped and just to make sure I still checked them all and pushed them in.