Hubcat Posted February 18, 2003 Share Posted February 18, 2003 I have 2000 Big Bear and I bought it used this fall. I have been having problems with the choke sticking and not being able to move it at all.Should I replace the cable and how hard is it?Thanks Link to comment Share on other sites More sharing options...
Dave Posted February 18, 2003 Share Posted February 18, 2003 Purchase some "cable lube" first and try that (WD40 also works pretty well). Look for obvious kinks, bends or cable outside damage along its route.[This message has been edited by Dave (edited 02-18-2003).] Link to comment Share on other sites More sharing options...
Sgt. Rock Posted February 21, 2003 Share Posted February 21, 2003 Had a similar problem with my 2001 kodiak. Turned out the cable was fine but the choke plate in the carb was sticking. Just another thought. Link to comment Share on other sites More sharing options...
Hubcat Posted March 11, 2003 Author Share Posted March 11, 2003 Thanks GuysI have been waiting for warmer weather to check it out. There seem to be water where the cable goes into the carb.I talk to the dealer I bought it from and he says that will happen and to take the cable off the carb an put some gas treatment on it to remove the water and also to use cable lube. Link to comment Share on other sites More sharing options...
Recommended Posts