Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

youth shotgun options for turkey


fletcher

Recommended Posts

taking my 10 yo daughter for first turkey hunt.

20 gauge semi, what load is enough killing power but easy recoil?

2.75 #6 1 oz full chock, enough if you keep within 30 yards?

I am thinking shooting sticks, chair, blind, ear plugs, maybe a heater.

Practicing with bb gun.

Link to comment
Share on other sites

2 3/4 #6 game loads are adequate for a turkey at closer rages, 30 yards might be on the outer edge though. Pattern the gun on paper, if you are putting 8-10 pellets in a turkey head consistently you're in.

Not sure what you are using for sights, but I've hunted with a few youth hunters that struggled to use the bead and front rib when excited, and wound up shooting high at birds. A cheap magnet attached rear sight or a red dot will help. I bought a used red dot for my sons gun on hsolist for $30.

Good luck!

Link to comment
Share on other sites

The 20 gauge will do fine. During practice use 2 3/4" trap loads. You pattern the gun with 2 3/4 turkey or pheasant loads. If she shoots at a turkey with the hunting loads she won't notice the difference. Patterning is brutal though for a young person even with a 20 gauge. Heck it's tough on adults too. In the woods with the turkey in front of them and the blood pumping it's not a noticeable difference. Adding sights is a good recommendation as her shots will likely be close in and if you get a bird inside 20 yards the sights will help a lot with the small pattern area.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.