ready2fish Posted February 19, 2013 Share Posted February 19, 2013 I have a few years old 2 hp solo gas auger with very little use and this weekend i fired her up for the first time this year and found it was leaking gas. After i got home i did some looking and found it coming from the air vent. Any one every had this happen and found out why it went bad? also could someone point me to a good place to buy this- Thanks Quote Link to comment Share on other sites More sharing options...
20lbSloughShark Posted February 20, 2013 Share Posted February 20, 2013 If you mean for the gas cap, you can take that screw off and add a small rubber washer or o ring to seal it. You can probably find it on eebay, or you can definately find it at strikemaster in big lake. Quote Link to comment Share on other sites More sharing options...
silverbulletguy Posted February 20, 2013 Share Posted February 20, 2013 I noticed I had something similar with the leaking gas but I found one of the two lines coming out of the tank had worked its way loose. I just jammed it back into the hole in the tank that it was close to and haven't had a problem since. Quote Link to comment Share on other sites More sharing options...
ready2fish Posted February 20, 2013 Author Share Posted February 20, 2013 This vent is located behind the air filter so there is no gas cap vent. I called and found out they replaced this one with a red air vent due to the one like mine leaked over time and they said a new one would fix this. Good to know they realized it needed fixing and came out with a better product, great job Strikemaster Quote Link to comment Share on other sites More sharing options...
CaptainMusky Posted February 20, 2013 Share Posted February 20, 2013 Also check to make sure or vent or gas lines haven't broken off inside the gas tank. Mine had. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.