gofishingtom Posted July 12, 2012 Share Posted July 12, 2012 have a 175 efi last night fishing and putting the trim down it made a little louder then a clicking noise kind of a clunk as it was going down like 3 seperate time when i pulled it out of water trimmed it all the way up and checked fluid and it was full any other ideas what i could check... Quote Link to comment Share on other sites More sharing options...
gofishingtom Posted July 12, 2012 Author Share Posted July 12, 2012 no ideas from the boat experts!!!! Quote Link to comment Share on other sites More sharing options...
yaggie Posted July 13, 2012 Share Posted July 13, 2012 Be sure your pivot point is well greased. If your pivot shaft is dry it will make noise like that. That would be your starting point. Grease it up and run tilt up and down and see if the sound changes. Quote Link to comment Share on other sites More sharing options...
BoxMN Posted July 13, 2012 Share Posted July 13, 2012 Be sure your pivot point is well greased. If your pivot shaft is dry it will make noise like that. That would be your starting point. Grease it up and run tilt up and down and see if the sound changes. Ditto. grease the piston ends, the little "ball bearings" on the ends can get dry. Quote Link to comment Share on other sites More sharing options...
gofishingtom Posted July 14, 2012 Author Share Posted July 14, 2012 thanks guys that is what i kinda thought was looking for some back-up on it got to the lake last night and greased it up and works great now...i always grease those in the spring and fall i must have forgot one spot this spring... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.