ezeswivel eze? which 1

[Ridgerunnr]

My 03 1700lund sport needs a frt butt seat assy. I called

Swivel eze to order the hydraulic pedestal. They said i need

To measure the mount hole..problem is my boat is 4 hours away.

anyone know which one i need? Its the round hole w the square lund style notch

[Triple_D]

I measured my 2001 Pro Sport, it's roughly 2 3/4 inches wide, the square tab is roughly 3/4 inches wide. I checked my seat pedestals which I believe are original seats and they were made by Springfield Marine out of Nixa, Missouri if you want to try them too,

[Ridgerunnr]

They have never heard if one that big..largesr is 2 3/8...

[Mr. Wizard]

another related question... how tall are the pedestals your measuring? I have a new boat that came with 11" tubes and think the ones in my old boat were 22" I can get a taller one for the bow but wonder if taller ones will fit by the counsoles? 2012 1650 fishhawk

[TurnUpTheFishing]

swiveleze makes one that is 2 3/8 and one that is 2 7/8. I was just looking into them tonight myself as I lost the inner plastic sleeze for mine which is 2 7/8.

[Triple_D]

I went and remeasured the opposite side of the opening, I'm 90% sure you want the 2 3/8 ridge runr

[Ridgerunnr]

Yrp 2 3/8 is the correct one..finally reached a buddy near my boat and he measured