Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

First Time Fish House Owner/Questions


tisosy11

Recommended Posts

I had a few questions about wheel houses and things needed:

What sort of license do I need to get, is the one below all I need:

Fish House, Dark House, or Shelter if left unattended overnight 11.50

• 3 year license 34.50

It has a license plate on it and I know I need to update the tabs yearly.

Also, I can't seem to move the microwave...do these get bolted down usually and will I have to remove tongue and groove to get to the bolt?

What sort of things are must haves for you guys to have in your wheel houses?

Man am I excited for next year now!!!

Link to comment
Share on other sites

What sort of things are must haves for you guys to have in your wheel houses?

Man am I excited for next year now!!!

An electric auger and a nice generator are hard to live without. Hole sleeves help to keep your banking from melting on a windy fishing trip wink

There are tons of other little things too. Like a spring on your door (wind again), power invertor to run tv's, fan, lights, etc without a generator..........torch, jumper cables, wd-40, towstrap, backup heater, toilet seat, backup auger...... The list goes on forever.

If you fail to plan, you plan to fail smile

Link to comment
Share on other sites

Well first I would buy the one year when purchasing the 11.50 liscense! Mine faded so badly after just a cpl weeks that you can't read it without a magnifying glass. Put it up before you turn your heat on with clear tape on all 4 sides due to window condensation, I have a new house and probably 25 yr old electric auger and love the electra with an 8" cutting auger on it. I will also say to get an extension depending on the frame height and lakes you plan to fish... I found I need another one if I plan to go to LOW on a good ice year! You can pick one up on hsolist usually around $100 or less. If planning a long trip back-up items would be a good bet. A 12 volt fridge unless you got an RV edition is nice for a few cold items. One cheap less smelly way to lower bathroom odor is doubled plastic grocery bags with a scoop of scented cat litter at the bottom! Sounds funny, but with 5 people in a house it makes a big difference! Extra pin or 2 and some blocks if plan on being there for awhile (especially late season when water tends to rise above the ice and re-freeze with your frame attached and usually the floor with it. I've got heavy duty blocks, but that way if they freeze in a hit or several with the hammer and they pop loose fairly easy.

Link to comment
Share on other sites

If your house is under 3000 lbs. you can get a permanent license. Otherwise, you needs plate and tabs.

I have a checklist for everytime I move my wheelhouse. One thing to have is a spare cable, pins, and clamps for your winches. Generator is a must for longer stays. Sleeves for your holes and fans to circulate the heat. I always put a pop-up house for the bathroom. 8 gallons bags fit nicely in a 5 gal. pail with a lugable loo lid. TP - paper towels, plates, bowls, plastic glasses, spoons and forks. Fillet knife. Backup heaters. Tools - t handle - Silicone spray - Camera

I have a 10" propane auger with extention for drilling especially on LOTW. Slush box. Broom and dustpan. A good shovel!! Small propane torch for thawing locks. Ice chisel. High lift jack and 6 ton bottle hydraulic jack. A 5' pry bar. Spare propane regulator. TV, DVD player, movies.

I carry 2 spare tires. Blocking 2x6s work good

Plastic 4' folding table and table top grill. It's all about the food.:)

If you can't figure the mircrowave deal call the manufacture.

I have stayed for more than a week several times on LOTW. Baudette and the resorts are very helpfull if you need help.

Enjoy you unit. Mine is used winter and summer. Start a list and go from there.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.