Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Best or Unique musky lure (action)


BIG

Recommended Posts

...the side-to-side action of the 'jackpot' and 'reef hawg' and the slow action of the 'creeper' make them remarkable musky lures because of their 'unique' action in the water, and new musky anglers would be well advised to use these lures....Are there any other musky lures out there that provide unique action that anglers have had success with???

Someone has already posted a 6"-9" white sluggo and I think this qualifies...others?

Link to comment
Share on other sites

An old reliable is the Cisco Kid. Originally it was an early "crank bait" (before that term was used). It has a tantalizing wobbling action. I believe it is now made and sold by Suick, but I think it has the same specs as the original.

Black/silver has been my favorite.

Link to comment
Share on other sites

...(1) since I know you are a spinnerbait fan, we'd have to include dropping spinnerbaits down the weedline and 'ripping' weeds...and, (2) the large shadrap is also good for ripping weeds....although neither lure has unique action on its own....

Link to comment
Share on other sites

Here are a few of my "Unique" lures.

Magnum Jitterbug -- Wobble and plop across the top.

Fuzzy Duzzit -- Blade bait (like the cicadas and sonics.)

Hawg Wobbler -- Slow surface wobble.

Bull Dawg -- Just one Awesome Lure! Work it like a crankbait, jerkbait or a jig -- it does it all.

When the basic lures aren't catching fish, you need to use something that gets their attention.

Link to comment
Share on other sites

Completely agree with the Bulldawg assessment!! I've had good luck with magnum plastics too. Used up every one I had up on Eagle Lake, ON last summer. Action Plastics makes a LARGE baitfish looking plastic with the grub type tail. (Got mine thru Cabela's online catalog in the saltwater tackle section) They come in 6", 9" & 12" models in some good colors. I thread a piano wire leader thru the nose and out of the bait about 1 1/2" to 2" from the tail end and then attach a 3/0 or 4/0 heavy duty treble to the back end. You can do a slow swim retrieve, jerk it, splash it like a topwater, whatever. What's really good is that the bait has such a slow sink rate it's easy to fish right over the top of any submerged weeds. Try it in the spring when slower can be better!!

Link to comment
Share on other sites

...thanks guys - forgot about the Bulldawgs and other plastics.....

Here's another one : musky candy ( a very small bucktail that is dynamite, especially on Cass Lake - this is not a secret lure on Cass) It is a good lure to use when nothing is biting...

Link to comment
Share on other sites

let's summarize....

.........jackpot, mag. jitterbug,
hawg wobbler - black or yellow,
6" - 9" white sluggo;
.........reef hawg 8" perch (these lures do
not all have the same action)
large shad rap
.........cisco kid - black and silver
.........Plastics:
Bull Dawg (large)
Large 6"9"12"saltwtr/Cabelas grubtail

.........musky candy(char. blade - brn hair)
#5 silver/black "dinnerbell" Mepps

(need colors and sizes - specifics dudes)

Link to comment
Share on other sites

Faves of mine?

Amma Bamma's = 8" Purple, Green.

Hughes River 8" Shakers & 6" Hughey's > Any pattern.

Hawg Wobbler - 8" Black

Cico Kid - 7" Pike

Manta - 8" Sucker

Cobbs Shad & Glider - 6" & 8"
Sucker, Perch, shad...

Depth Reider - 8" Any pattern.

Reef Hawgs - Any size or pattern.

Jackpots - Black.

Bobbies - Any size or pattern.

Topraider - Any pappetn.

Go fish'en.

Big V.

T.

Link to comment
Share on other sites

.......nice post....now if you sell them you'd be a millionaire.....
.......if you could only bring three (of the above) in your boat - which ones ?? thanks....(we are talkin' Vermillion- right?)

Link to comment
Share on other sites

If I had to pick three out of Tom's list it would be.
Bama
Bobbie
Hawg Wobbler

I caught a 42" pike on my Amma Bama and it's gut split open yesterday, I emailed the guy that makes them and he told me how to fix it or send it back to him and he will take care of it free of charge, it's the only one I have left so I followed his instructions and it's as good as new minus the beautifull paint job that it once had. This has to be the easiest glider to use, big wide swings when cranking slow and a hang time on the pause like no other.

Link to comment
Share on other sites

....nice post...that what I was after when I started this string....different and unique action musky lures....I have never tried the anna bamma - but it sounds interesting....

Link to comment
Share on other sites

My bread n butter is baby jointed depth raiders in natural perch and shimmering shad. They catch muskies and lots of forage.

Link to comment
Share on other sites

I'm anxious to try something that's probably been done before but I've never seen it or heard of anyone mention it. I am using the biggest Johnson Silver Spoon I can get and trailing it with a 10" brown and white Sluggo. It responds beautifully to slow rod sweeps and twitches. The trailer weaves side to side like a giant leech or snake and seems like it would be a great option in skinny to mid-depth water. Opinions? Criticisms? Thanks!

Link to comment
Share on other sites

....we all have to know if you catch anything with that lure....there is a "poster' on Musky 101 who says it takes him 1,000,000 casts to catch a musky....therefore, you can see that a lot of the time it doesn't matter what you throw, you are just filling up numbers between 1 and 1,000,000...or you could catch two fish on consecutive casts at 1,999,998 and 1,999,999. ...keep casting man and pick the best times - avoid sun.....but - innovation is good......

Link to comment
Share on other sites

There's no doubt in my mind that the spoon/trailer is a good option for pike and musky. Typically, after spawn I'm like most. I go a little deeper and speed up my presentations a little depending on the mood of the fish. I just like the giant soft plastics as an option and believe that weed cover, a stiff rod and some elbow grease can "Jack Up" a fish when you rip and flutter a spoon. The BullDawgs work great here in IN but may be becoming too common on some of our smaller glacial lakes. I guess we're always looking for new options aren't we? It's fun though. Sure am thankful for a swimming pool in the back yard.

------------------

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.