snakes Posted May 15, 2011 Share Posted May 15, 2011 The trim is noisy and slow. What is the proper way to add fluid? This topic is not covered in the manual. Thanks Quote Link to comment Share on other sites More sharing options...
boatfixer Posted May 16, 2011 Share Posted May 16, 2011 Tilt to full up position, lock the motor with the mechanical lock for safety. You should see a large plug, slowly crack it open and remove, the oil should be level with the bottom of the threads. Fill with marine trim & tilt fluid if necessary. Cycle a couple times up and down to purge the system of air. Quote Link to comment Share on other sites More sharing options...
snakes Posted May 16, 2011 Author Share Posted May 16, 2011 Thanks boat fixer! I'll give it a try the last time I tried it I loosened a knurled cap on the tank and fluid leaked right away. The lock must be the secret. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.