Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lowrance LCX-17M and Navionics Question.


Recommended Posts

I have a LCX-17M Locator and yes I know I'm behind the times with this old POS. But thats what I have. Anyways, I'm trying to download the "latest" software onto a card and it goes on the card fine but when I place the card into the locator it doesn't acknowlege the chip. I've looked in Browse MMc files but it isn't their. Then I put my '07 navionics chip in and it comes right up. What am I doing wrong? I've followed the Lowrance directions to a T, but its not working.

Also, My '10 navionics chip is VERY slow in my hand held gps and in my locator. Is their any way to speed these up?

Any help would be great.

Link to comment
Share on other sites

How big is the SD Card you are trying to use, I'm guessing that is the issue, your Lowrance probably has a limit on the size of card it will read, if you have a 128 - 512MB card around, I would try that instead.

Mike

Link to comment
Share on other sites

I agree, find a smaller card and use the Lowrance to format it and it should work.

And no you can't speed them up, you are limited to the processor speed inside and with those older units they have a lot smaller processors than the newer ones as they are designed to handle the newer map cards. But even some of the lower end units sold today aren't fast enough to keep up on the high definition lakes.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • A quick pass through the Black Hills on the way home…  
    • Bighorn sheep at Lemoille canyon.   
    • Wild horses in Sparks Nevada   ad
    • Donner lake near Donner pass in California   
    • Redwoods near Big Sur California.  
    • Power output is:  amps x volts = watts   If your charger is pushing 10amp at 12 volt: 12 x 10 = 120 watts.  2 banks = 240 watts.   240 watts / 120v at your outlet = 2 amp.   Efficiency isn't 100% so it's gonna be more than 2 amp on your garage circuit, but maybe like 2.4 amps.     I think.... It's been a while, LOL.  Either way 20amps output on a charger for a 12v battery isn't the same as pulling 20amps off your garage circuit.
    • Wanderer, thank you. I did look at the breakers for my garage/outside outlets and they are 20 amp.  I reached out to the company that makes dual pro chargers with the question and this is the reply I received.:     Thank you for reaching out to us here at PCS. The Sportsman series charger, although rated ay 10 amps per bank, draws only 5 amps from AC when all banks are charging. As the Professional series which provides 15 amps per bank, has a maximum AC draw of 7.5 amps with all banks charging.  
    • That’s an interesting point.  While I understand how Amps work, I can’t say I’m fully versed in the draw of modern on board chargers.   By modern code, outdoor and outbuilding outlets should be 20 Amp.  If your outside or garage outlets are 15 Amp, they’re undersized.  But that is quite possible if the garage was built before that code became enforced.   With heavy use, you may not be able to keep up on daily charging without the 10 Amp per channel charger, however that’s with very aggressive use for consecutive days.  On our June muskie trip we run up to 15 hours a day for up to 7 days on a 24V Ulterra and by mid week we’re starting to see the batteries not reach full charge.  That’s a lot of bank running at nearly 2 mph on windy shores.   We charge at a dock with up to 6 boats per dock plugged in - some with 36 volt systems.  Now I’m not sure if all the outlets are on a dedicated circuit but I’m betting they aren’t.  But they’re all 20A outlets with a lot of draw on them.  At max draw, they’re not keeping up but also not tripping the breakers.   What I’m saying, without a technical review is: you’re probably fine either way.  You probably won’t tax your batteries so much that they can’t recover on a 5 Amp per channel overnight charge and a 10Amp per channel charger probably won’t be too much to plug into your 15A outlet - if it really is a 15A.  If you’re sure, you’re sure, but I would double check if you’re not 100%.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.