Tator2k Posted April 13, 2011 Share Posted April 13, 2011 Which receptacle do you use with a 36v TM? I see Minnkota has their 12-24-36 3 pin outlet and plug. It looks smallish. Is that going to be the right rated size? Quote Link to comment Share on other sites More sharing options...
Jim Almquist Posted April 13, 2011 Share Posted April 13, 2011 Are you talking about one of these? Quote Link to comment Share on other sites More sharing options...
Tator2k Posted April 14, 2011 Author Share Posted April 14, 2011 Yes. Is this the best or only option available? Quote Link to comment Share on other sites More sharing options...
Jim Almquist Posted April 14, 2011 Share Posted April 14, 2011 That should work just fine. You are really talking about a difference in volts and that type of plug is what most all use with no problems. Quote Link to comment Share on other sites More sharing options...
remington 300 Posted April 14, 2011 Share Posted April 14, 2011 it also depends on the wire size your connecting to the plug, that sytle plug accepts upto 8 gage wire i believe, i ran 6gage wire to my motor and needed a plug that would accept 6 gage wire,i ended up getting a plug from the motor clinic in bloomington. some of those plugs you can make the 24,36 volt with jumpers right in the plug, rather than a jumper fron each battery.goodluck,mike. Quote Link to comment Share on other sites More sharing options...
Tator2k Posted April 14, 2011 Author Share Posted April 14, 2011 I'm visiting the Motor Clinic tomorrow. Grabbing all the new parts from Battery to connectors to TM. Quote Link to comment Share on other sites More sharing options...
hanson Posted April 15, 2011 Share Posted April 15, 2011 Cabela's sells a plug from Marinco that accepts 6 gauge wire in the plug. Its not a cheap piece of equipment but I'm not sure if there is anything better out there. I wired my 24v Powerdrive with this plug. Quote Link to comment Share on other sites More sharing options...
Tator2k Posted April 15, 2011 Author Share Posted April 15, 2011 Got everything I needed from the guys at Motor Clinic in about 5 min.Their support rocked! Answered all my questions.Only thing they didn't have was the P/N: MKR-18A And I found that on clearance at West Marine for under $3.00!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.