Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

strikemaster mag 2000


HalloweenBuck

Recommended Posts

Sounds like something is not right with the clutch/gearbox, i would take it apart and compare to a diagram of what it is supposed to look like. should be able to find a diagram on the net somewhere, maybe strikemaster's HSOforum?

Link to comment
Share on other sites

I have the same auger. When this happens to me I usually find that the choke lever has been bumped partially on.

Not saying that is your problem, what I am saying is that a fuel related issue can appear to be a bad gear box. Do not rule out fuel or a carb. adjustment. Maybe start with a fresh tank of gas and some Seafoam. (keep it simple)

My auger is approaching 15 years old and every time this happens I think gear box but that has never been the case.

This early vintage Strike Master starts on the 2nd or 3rd pull every time and I do not know If I have even replaced the spark plug on it. It has served me well but I am not sure the new models would hold up to what mine has been through...

Oh By The Way ... Yes I use Amsoil have since it was new.

Link to comment
Share on other sites

I don't know about that. You said it turns fine without a load. I do not think they have more than one drive gear in them as they do not shift... Bad gears grind hear any grinding when the auger is turning ?

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
    • I went ahead and watched some of the MLF coverage.  Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.   Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.