wannaeye Posted August 1, 2010 Share Posted August 1, 2010 I have a 2006 1700 Lund Fisherman with a loose windshield. It looks like Lund screwed the frame down to the gunwhales, so I would have to disassemble the windhsiled frame to access the screws? Retighten and re-assemble? Is the windshild frame simple to break down? I am pretty handy, but I definatly dont want to tear into something way over my head.Anyone have experiance in repairing theese. Quote Link to comment Share on other sites More sharing options...
Valv Posted August 2, 2010 Share Posted August 2, 2010 At the base of the windshield there's a black plastic stripe, approx 3/4" high, remove that and it will expose the slot where the screws are sitting. If they used bolts and nuts you will have somebody turn the nuts underneath the console while you hold the bolt. Quote Link to comment Share on other sites More sharing options...
wannaeye Posted August 3, 2010 Author Share Posted August 3, 2010 A HUGE THANK YOU to Valv for the advice. I was able to remove the black strip, tighten screwss and replace a few stripped out ones.Thanks for helping out!!! Quote Link to comment Share on other sites More sharing options...
Valv Posted August 4, 2010 Share Posted August 4, 2010 No problem, thank you for posting this thread, where others can learn too.That's what we are here for, help each others. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.