silver_squid Posted July 27, 2010 Share Posted July 27, 2010 Hey folks,Just curious if there is an easy way to put the loop on inline musky bucktails. I have been using two sets of pliers and lets just say I know there must be an easier way. Thanks! Quote Link to comment Share on other sites More sharing options...
50inchpig Posted July 28, 2010 Share Posted July 28, 2010 you can use vicegrips and needlenose to finish with a diamond or square shaped loop, as long as the top of it is in line with your shaft you'll be just fine Quote Link to comment Share on other sites More sharing options...
mainbutter Posted July 28, 2010 Share Posted July 28, 2010 Vice grips are necessary IMO for dealing with the .051 or .062 wire.I believe that production lure-makers have some unique wire-forming tools as well, but these are generally expensive (excess of $100) and I don't know how the work, or if they're just designed for shaping wire for spinnerbaits. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.