Ufatz Posted July 7, 2010 Share Posted July 7, 2010 I simply cannot find dimensions for the Yamaha fuel filter/water separator and I don't want to blindly order a large cumbersome unit that will be in the way. And where in MN can I call to buy one with a reasonable expectation they will actually HAVE one in stock?I also have a hunch that any automotive unit will get the job done and at less cost.But that's my practical and paranoid side coming through.I get those spells every now and then.Thanks. Quote Link to comment Share on other sites More sharing options...
311Hemi Posted July 7, 2010 Share Posted July 7, 2010 Racor would be another good brand to look at.....a lot of guys run those.I can measure my Yamaha one later today....it's pretty big though. Quote Link to comment Share on other sites More sharing options...
SandBayFishCamp Posted July 7, 2010 Share Posted July 7, 2010 You can get by with the 'mini10' since you have a 115. I have a 150 and it requires the larger one but I would say the filter is 7" high and the mount assembly is 2" high (9"-10" total height). Width is about 4" at its widest point. Rapid Sport in Ham Lake will likely have them in stock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.