Loosing reading at higher speeds

[gspot]

Can someone simply tell me how to adjust/locate my transom mount transducer (x-75) so that it functions continuously

[Thomas]

what's it doing?

[WalleyeSnob]

turn the ping speed up it might be a little low and that is why you are loosing the bottom

[Guest]

Check the instructions for the transducer installation that came with the unit. A couple of things...Take a straight edge along the the hull to check the depth of the transducer face. Check to see if it mounted so that the water can flow over the face without turbulence from the hull of the boat. Make sure the tranducer is attached to the boat and is not flipping up at speed. Some other things...Check the unit for proper range, sensitivy etc. It can be a lot of things and a lot of little things that come together.

------------------
Kevin Neve's Devils Lake Guide Service
fishingminnesota.com/kevin-neve-guiding/
e-mail: [email protected]
Phone: 701-473-5411 or 701-351-4989
Minnewaukan ND

[Walleye Guy]

Make sure that it is not lined up with one of the ribs on the bottom of the boat. Also make sure that you have the bottom of the transducer parallel to the water and not to the edge of the boat.

If the bracket is adjustable lower the transducer in the water if it still has room to go.

I hope this helps.