pulsar_nx Posted June 12, 2010 Share Posted June 12, 2010 Anyone know how to check the fluid level on a tilt and trim? My owners manuel for the evinrude/suzuki is quite bad. I removed the allen bolt in the middle and nothing came out but it seems to me that it should be the fill hole like on the lower unit. A little history as to why I am looking at this. I have burnt out two trim up switches in less than a year but after looking at it yesturday I'm starting to think that I may have a relay that is toasting the switches. Quote Link to comment Share on other sites More sharing options...
marine_man Posted June 22, 2010 Share Posted June 22, 2010 I have burnt out two trim up switches in less than a year but after looking at it yesturday I'm starting to think that I may have a relay that is toasting the switches. That would be far more likely the root cause of your problems than low trim fluid - the symptom for that would be poor lift performance / noisy operationmarine_man Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.