midex717 Posted June 8, 2010 Share Posted June 8, 2010 Gents,I read on another forum that it is good to let a Optimax warm up, but there was no indication of a length of time. I do let her warm up, maybe 1 to 2 minutes, and then initial throttle up is slow, and low power for a bit. I'm wondering if I'm giving enought of a warm up time.Any thoughts out there?Thanks!! Quote Link to comment Share on other sites More sharing options...
Loose Posted June 8, 2010 Share Posted June 8, 2010 The book for my 200 says 30 to 60 second. Quote Link to comment Share on other sites More sharing options...
moreyes Posted June 9, 2010 Share Posted June 9, 2010 Depending on water temp, 1 to 5 minutes. A Smartcraft monitor or gauge helps you out without guessing and will let you know if you have a stuck tstat. But yep when I am on the river in the fall or spring with cold water accelerate slowly, cold seizure is ugly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.