rod finish second coat

[luckycrank]

I have never had to second coat my guides or wraps using high build finish

fortunatly I was out of finish on my last project and had to use a different brand.

I didn't get all the threads covered properly.

can you give them another coat?

[CAMAN]

With the same brand? Yep!

Don't know if I'd try two different brands on top of the other if that's what your asking. They may react with each other.

[luckycrank]

same brand

[upnorth]

You are fine putting on a 2nd coat. I normally use a regular build and go with 2 thin coats anyway. I get a flatter nicer finish that way. That and complex butt wraps rarely get a nice even finish with one coat anyway. All that thread is a bit uneven.

[luckycrank]

I have built probally 20 rods overs the years never had to second coat so I was a little unsure what to expect