Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Lowrance Endura Safari


B.R.O.

Question

Anyone have one of these that can tell me more about them? I want to get something with good mapping software and user friendly, touch screen, etc. And something I can afford, dont have a couple grand for the H.D boat units

but I do plan on getting the new Lake master chip now that my home lake has 1 foot contours. I cant believe they still don't have the ability to run together yet and that's why I'm holding off for now...sucks, would have liked it for the opener. Anyone know when its going to get done?

Link to comment
Share on other sites

20 answers to this question

Recommended Posts

  • 0

LakeMaster and Navionics are both using microSD cards in 2010, which is what is needed for the Endura. The problem is that the Endura software will not read LM or Nav data yet. I keep hearing that it's coming soon from Lowrance .... been hearing that for about a year now ....

Link to comment
Share on other sites

  • 0

thanks rippin_eyes! I was asking the young guys that work the electronics counter at the st.cloud Gander and they claimed the new lakemaster chip was due in this week and would work with the Endura line..I had my doubts about it and you seem to have validated them...guess we have to keep waiting.

Link to comment
Share on other sites

  • 0

that is encouraging news as that is the same unit that has caught my eye for the features vs cost quotent. Obviously the sticking point has been the compatibility...with that (soon) no longer a concern, I might be purchacing this unit sooner rather than later as well! Any updates that you can give us would be greatly appreciated Rippin_eyes.

Link to comment
Share on other sites

  • 0

ok, the 1.4 software is out. no good on mine. no lake map data using the lakemaster maps for MN. unplugged and plugged the SD card a few times to make sure it was reading it properly and in the process broke the SD slot in my endura. it no longer snaps the SD card in place. Great stuff lowrance. I work in this business, and this is a joke. ironically I sell test equipment for software testing. Feel free to contact me if you need help!

Link to comment
Share on other sites

  • 0

Rippin-eyes,

Tried sending you a pm.......said that it was disabled.

I bought a 2010 Lakemaster chip for Lotw's/Rainy and a hand held H20 down in Bemidji, it would'nt display the lake map..............When I returned it I was told that the 2010 chips would not work in the discontinued H20's and that I'd have to buy a different hand held (Endura), well, the chip did'nt work in that one either............I just asked for my money back and said forget it!

Link to comment
Share on other sites

  • 0

FYI: Endura/LakeMaster users, check in at the LakeMaster web site.

A new Endura program is out for a free chip update for the NEW Endura line of Lowrance chips bought between Jan 1 2010 and the end of may. See site for details.

Link to comment
Share on other sites

  • 0

How can you tell if the chip is for endura? I have updated to the 1.4 and bought the chip this weekend but its not working. I'm guessing I have the wrong chip but I told the guy I had an endura out&back. Or is there something I could be doing wrong?

Link to comment
Share on other sites

  • 0

A correction, you will need the new 6.2 in the Endura's...6.1 will not work. See the info on the Update Exchange Program and see if it applies to you.

It's getting tough to keep up to this deal Eh?

Sorry if my previous post was misleading or lacking in complete info...my bad.

Link to comment
Share on other sites

  • 0

I just got back from GM and they didn't have the 6.2 version so I guess I have to contact Lakemaster and have them swap it out?

Not really pleased that the guy in the store told me it would work in my endura when I specifically asked him about it. They plugged it in to their endura out&back in the store and it wouldn't even load up.

Link to comment
Share on other sites

  • 0

Frustrating..Ya-U-Bet-Ch-Ya...but consider this once.

If you notice...they sent the new MN 6.1's out and they all say "Endure Comparable" on the package. So one would assume...ya...it's compatible...right?

Then they issued the new "Trade In Program" for the 6.2's...direct to LakeMaster.

So...it's not too hard to see how it can get confusing to the retailer staff too..is it not?

I would not be too eager to shoot the messenger on this deal guys, all things considered.

Link to comment
Share on other sites

  • 0

i just bought the Endura along with the lake master chip version 6.1 that says endura capatible right on the lake master box from TB. the chip isnt even the right size to fit in the GPS.crazy, i am hoping i can return both the gps and chip

Link to comment
Share on other sites

  • 0

It will have the Micro chip inserted into the rear of the SD card that will fit the Endura line...they are a "Converter Chip"..so it should be there just tucked into the rear of the SD...pull on it and it will pop out. The Converter Chip makes it possible for you to use it in both SD and Micro SD applications.

But if it is not 6.2 and if you have not installed the Lowrance software update for the Endura yet...than it will not do you any good unless you swap it out for free at LakeMaster for the new 6.2 version.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.