ordering complete trim gauge and harness?

[Fish&Fowl]

Is there a place online I can order the trim gauge and harness for an '06 Yamaha 150 4-stroke?

Thanks for any info!

[jigginjerk]

You might want to check and see your boat and motor may already be wired up for it. My 05 115 opti that came on my smokercraft had it all there I just had to buy the gauge and hook up the wires that operated the tilt gauge. Most times the boat is installed with a harness for everything they just don't put the gauges in.

[marine_man]

What kind of gauges do you have on the console? Yamaha brand or off brand?

Depending on your answer you may already be wired for a trim gauge and just not have the gauge.

Check the back of the motor for the sender... while sitting in the boat, look at the front of the motor, on the tube that the steering cable passes through, between the two motor mount brackets. Is there a plastic ring / p clip type looking part there? If so, you've already got a sender (which I suspect you do on this motor).

marine_man

[Fish&Fowl]

Thanks for the info guys...I believe they are Yamaha gauges and I will take a look to see if the harness is there already.