Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
slipperybob

Ice baitcasting rods

3 posts in this topic

Hat's off to Thorne Bros. Picked up my two walleye baitcasting rods last night. I was little surprised that I got the Thorne Bros. logo on the bottom of my rod butt. Got my Citica 200E's on. Need some ice now.

Share this post


Link to post
Share on other sites

Im confused. What is the point of baitcasters on the ice? Its all I use in the summer but I dont get the point in the winter.

Share this post


Link to post
Share on other sites

I can pull line from a baitcaster twice as fast and twice as easy compared to a open face spinning reel on a frozen spool.

Baitcaster has much smaller profile, no need to break down handle.

I can adjust depth on spooning jig by a foot without flipping the switch for backreeling or opening the bail.

I will never have to worry about line coil jumping off the spool.

Baitcaster have smoother drag and faster drag adjustments

I will have significant line twist reduction.

That's just from the top of my head.

If I get really board, I go outside and do some baitcasting practice...j/k

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0



  • Posts

    •   Then I wonder if they'll go back to the old way.
    •   Melt.   They should invite Obama and do a real roast of Donny boy.  
    • 6 million dollars per mile.    Oh My. Did Mexico cut the check for the down payment yet?  Has Merkel cut a check to Nato yet?    
    •   Plus+ 1 the carb. It's filling up the crank case with gas. After you clean or rebuild the carb tip it on the side with the plug out to drain the crank before trying to start it. Or if it's going to be a while take the plug out now and may be the gas will evap a bit by the time you get at the repair. good luck and let us know how it went. That was my first ATC.  
    • Ovi sure makes it look easy out there. What a beast.
    • And we know you like it raw.  No vaseline.   Pink steak, sure.  But raw burger just isn't my jam.   
    • AHH..... Memories.... I would have loved to have a odometer on our  Tri-Moto 125, had to have put thousands of miles on that 3 wheeler, burnt it down a few times when we were kids but Dad said you'll have to learn to fix it yourself! I'm not bringing it back to the dealer every time there's something wrong! We got good at new pistons and rings and gasket sets..... eventually we brought it to the dealer in pieces after we couldn't fix it anymore, think it was a rod bearing that eventually was it's demise, ended up getting a rippin' Tri-Moto 175 after that, those wheelers were our main transportation since we didn't have drivers licenses yet....... good times for sure.   You're carb is having issues, I would go there first, somethings not stopping the fuel from getting into your carb, either the float has a hole in it and isn't floating, or it could be sticking somewhere or your needle and seat are shot.   Give the carb a good once over and you should have your problem fixed.   Those were pretty basic 2 cycle engines, I don't think they even had reed valves.   Mike    
    • I planned on getting seeds and starting them at home, I won't be up there until late April. I have planted squash up there and they did not grow, I will look at blue hubbard, I have not had/grown them before, they sound interesting.
  • Our Sponsors