Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Wax on, wax off


Tadpoletodd

Question

I recently purchased a fiberglass boat and was wondering what you guys & gals used to wax or protect the finish of your boats. I personally have a dark metallic red and want to do what I can to keep it looking good.

Any thoughts or suggestions as to what a good gelcoat/fiberglass wax would be?

Also, is there a good one-step marine application that you spray on and then wipe off for quick and frequent cleaning and protection?

Any advice would be appreciated?

Link to comment
Share on other sites

13 answers to this question

Recommended Posts

  • 0

I waxed my boat a few weeks ago with Mother's paste wax. I just used a hand applicator so it took a while, but it wasn't too bad. I just did small sections at a time and worked my way around the boat. Better to do it now when it's cool than later when the sweat is dripping in your eyes!

edit: I used Mequires carnuba wax, not Mothers. Sorry.

Link to comment
Share on other sites

  • 0

I bought some Wonderfoam and Restore a few weeks ago but haven't used it yet. I plan on giving the Restore a try after washing my boat (it needs it bad!).

Link to comment
Share on other sites

  • 0

I washed my boat last night and didn't dry it down..just stuck it back in the garage. Tonight I took my bottle of Restore and went after it. It looks as good as it did when I waxed it a couple of weeks ago. It takes a little work but really what doesn't when it comes to detailing a boat? Just spray it on, rub it around with a cloth, then take another dry cloth and wipe off the haze that is left after it dries and it's shiny-smooth again.

I haven't used the Wonderfoam yet since I just waxed the boat and didn't have any heavy deposits to deal with. If you have a "rode hard and put away wet" boat that has been neglected for a while, then the Wonderfoam is supposed to really knock down the oxidation and hard water spots. The Restore is a polish that can be used to bring the shine back.

I give the Restore a waytogo.gif

Link to comment
Share on other sites

  • 0

I use both Restore and Wonderfoam on my boats and they work very well. The Wonderfoam will take calcium depostis off of outboards if ou have them. I don't recommend using Wonderfoam on plastic parts of outboards or bare aluminum. It will discolor some plastics and will streak bare aluminum if left on it for a while.

Link to comment
Share on other sites

  • 0

Meguires (sp?) works wonders. I use it on my Lund but I know my buddy uses it exclusively on his Triton (glass). I usually use the "Quick Wax" which is a spray on, spread around, let dry (usually only a couple of minutes) and then wipe off. I'll also use the "Quick Detailer Mist" if the boat is just a little dusty or has water spots on it. In my opinion, there's no need to look at another product.

Link to comment
Share on other sites

  • 0

I use colonite... there is a cleaner and a polish. Very good marine quality polish for fiberglass boats. I have polished a few million dollars in motor yachts and cruisers with it. I get it at Kings Cove Marina here in Hastings.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.