Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

STRIKEMASTER ELECTRA QUESTION


Nellie30

Recommended Posts

I'm considering buying a used Electra & I am wondering what type of battery I will need to purchase as this one doesnt have one mounted on the top (it's a few years old.) What type of battery do I need? Do I need a deep cycle marine type battery? Regular car battery? I am concerned mostly with wieght of battery & performance...Also wondering if the replacment blades made today will fit this unit. I know the unit is over 5-6 years old...Appreciate any comments!

Link to comment
Share on other sites

I have the old electra with the white motor case, It has on it a Blue mora drill, so all mora blades will work with it, I have also used strikemaster power auger lower units on it, didnt like the results however...very sluggish and doesnt cut well. It needs a lower unit with shaver blades. As for the battery, and 12 volt will work but it depends on the amount of holes you want to drill. I have used a 12v 7.2ah vex battery with a 6" shaver and gotten 4 holes. a 12v 18/20ah battery has gotten me over 12 holes with the 6" unit. With the 8 inch shaver lower unit I got 1 hole with the vex battery, and 5+ with the 18/20ah one. The battery con be found online and at hardware stores, the dimensions are approx 7"l - 6 3/4h - 2 3/4w weighs 13# and has a large set of bolt on terminals to clip onto.

I hope this helps, I did extensive testing on mine this year to find out just what lower drill units work and what batterys will work for my needs. Dont forget you can always hook it up to your vehicle battery as well.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
    • I went ahead and watched some of the MLF coverage.  Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.   Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.