Rigging Thorne Bris. Springbobber?

[crappieseeker]

I just got my Thorne Bros. springbobbers. I have never used a springbobber before so I am just not sure how to set it up. It looks simple, but I really want to make sure. I also got the threader.

Thank for the help.

[Bigfife]

I had to go in and ask them what to do. Put the black end of the spring bobber into the last eye on the rod. Then take your threader and put it through the hole on the green ball. Run the threader through the spring. Put your line through the threader and pull the threader back through the spring. The line and threader should both pull through and then just pull the line out of the threader. I could have showed you this in 5 seconds, but it is a little harder to write it out.

[bigbritt]

dont really need the threader, just run the line through the guides, then through the spring, then put the spring into the eyelet. not very hard. i use 2# and never need the threader. go ahead if you want to, this way is a little easier for me.

[crappieseeker]

Thanks guys. I knew it could not be that hard, but I did not want to waste time on the ice.

Thanks again.

[Matt Johnson]

Here's a couple pics of a threaded Thorne Bros spring bobber...