evntam Posted June 3, 2005 Share Posted June 3, 2005 I've had my electric canons for about 15 years. They are supposed to come all the way up to the water surface by themselves. Now, I have two that won't do that. I have no idea what's wrong. I have to hold the switch manually to have them come up.Anyone have an idea?Thanks.Ev Link to comment Share on other sites More sharing options...
0 Hap Shaughnessy Posted June 3, 2005 Share Posted June 3, 2005 Cannon uses an ON-OFF-(ON)momentary switch. It is likely the switch is faulty inside. I do believe Russ sells them a the marine general, and they are not cheap about $15-20. the On-OFF-(On) in a DPDT switch is not something found at an auto parts store, so go see Russ. Link to comment Share on other sites More sharing options...
0 Valv Posted June 4, 2005 Share Posted June 4, 2005 Are these the same found on some boats for tilt & trim control from the bow ?If so I have plenty of them.....and not at that price.... Link to comment Share on other sites More sharing options...
Question
evntam
I've had my electric canons for about 15 years. They are supposed to come all the way up to the water surface by themselves. Now, I have two that won't do that. I have no idea what's wrong. I have to hold the switch manually to have them come up.
Anyone have an idea?
Thanks.
Ev
Link to comment
Share on other sites
2 answers to this question
Recommended Posts