Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

2 Channels!!


hanson

Recommended Posts

The last time I went catfishing, I was firing up the power auger and carefully filleting a golden shiner for cut bait. The bites were subtle. Sometimes the kitty would only pull the Ice Buster down a 1/2" and sit there. Set the hook and the rod is doubled over like you hooked a snag. Good stuff!

So it was a little different to be out yesterday with the long rods fishing for these kitties. The action was very, very slow but the catfish hit with authority. Its always a good sign when the rod is nearly yanked from your grips when the kitty slurps your fathead.

Channel Cat #1 was the smallest catfish I've caught in awhile and Channel Cat #2 was the very familiar 4 pounder, but looking kind of odd with 1 whisker missing. Both fish were released to fight again.

A big thank you to Fisher Dave for providing great conversation while we were dodging raindrops and snowflakes. The weather gods surely aren't looking down on us favorably right now.

The ironic thing is I had an awesome day icefishing channel cats in the rain, and a poor day open water fishing them in the snow!

Link to comment
Share on other sites

I had a great time myself.. I was happy we both caught fish witht he weather getting thrown at us... Only my cat was only about 20", and it had that funny white spot on its tail and long teeth.

Did it ever get near 40 degrees? I really couldnt tell between the 40 mph wind gust at the end. All I know is it took a while to shake off the chill.. an insulated flannel, carhart jacket, and an insulated one piece is usually more than enough layers for the 1st day of May.. but what do I know.

I think we would have hit a couple more if we could have been able to detect the bites in the wind gust.

I wont complain, the conditions couldnt have been more wrong.. better days are yet to come!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.