Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

BACKWATER EDDY


Recommended Posts

ED. EVERY FALL I DO ALOT OF DEER HUNTING DOWN SOUTH OF LEONARD ND BY THE SHEYENNE RIVER.QUESTION TO YOU IS ARE THERE ANY GOOD PLACES TO FISH IN THE FALL ALONG THE RIVER FROM LEONARD TO KINDRED? ANY INFO YOU COULD SUPPLY WOULD BE GREAT. THANKS TOM

Link to comment
Share on other sites

Lots of great fishing all up and down that region. Right off the bridge on the Sheyenne River just to the north of #46 is a dam, good for fall walleye and cats. This is just South of Kindred and a 1/4 mile to the East.

If your hunting in the sand hills look for rocky riffle areas on the river and try the pools above and below them. You will find SM Bas and walleye lurking about. Plenty of cats too. Early to mid fall frogs are good. As it cools jigs and fatheads are a good bet as are minnow imitator shallow running cranks. Jigs and big 4-5" twisters will get a few hogs.

Since you out hunting the river area just keep an eye out for good looking bends with lots of wood and backwaters. That type of structure tends to hold fish. A good bend with a mud flat at it's head will be a good spot to fish after dark and may be a handy camp site.

Lots of opportunities ya just need to scout them out.

Link to comment
Share on other sites

ED: THANKS FOR THE REPLY,WILL SCOUT THIS OUT AND TRY THIS FALL WHEN BOW HUNTING IN N.D. MAYBE THIS FALL ILL GIVE YOU A SHOUT AND WE COULD HOOK UP FOR A LITTLE FISHING,NEVER FISH CATS B-4.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.