Hello, I hope someone here can help me. I have a 1999 Mercury 175 EFI on a Crestliner 21' Phantom. When idling in gear I have to trim the motor up to get the exhaust port out of the water, or else it will start building up pressure and foul the plugs. Not a big deal but I saw another boat with what looked like an exhaust snorkel on it. It attached to the motor and then angled up 4 or 5 inches so the exhaust could exit above the water level without trimming the motor. Anyone know what this accessory is called or where to get it? Any help would be appreciated. Thanks, David
We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha
motor. I will be buying and installing a trolling motor, wondering if I can get some recommendations on what pound thrust I will
want for this boat? Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke
Mariner motor) I will appreciate any help with these questions.
I went ahead and watched some of the MLF coverage. Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.
Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
Question
Guest
Hello,
I hope someone here can help me. I have a 1999 Mercury 175 EFI on a Crestliner 21' Phantom. When idling in gear I have to trim the motor up to get the exhaust port out of the water, or else it will start building up pressure and foul the plugs. Not a big deal but I saw another boat with what looked like an exhaust snorkel on it. It attached to the motor and then angled up 4 or 5 inches so the exhaust could exit above the water level without trimming the motor. Anyone know what this accessory is called or where to get it? Any help would be appreciated.
Thanks,
David
Link to comment
Share on other sites
0 answers to this question
Recommended Posts