New Tarp installation?

[randerson]

I have a older Trap Pro and I purchased a new tarp for it and I'm about to install it and relized that my old tarp has gromets attached to the bottom to bolt threw the sled where this new one doesn't how do I attach the cover to the sled I have a older Voyager and I believe that had a rubber channel that went over tarp and over edge of sled with a small screw in it. Is this what I need or do I just put a hole in it??? Thanks for any help in advance.

[muskie hunter]

Go to Clam.com and look in parts for U channel molding this will be what you need to install a new tarp.

[randerson]

Thanks I just seen that hopefully I can pick one up from them in Rogers as there new shop is just a couple hundred yards from my work

[Charlie Mason]

I did this with my Pro, had the grommets and used the U-channel to put the new tent on. Instead of tossing the old one, I acutally put it over the top of a second Pro that I had by using the molding that came with that one. Xtra dark, and now another layer of insulation as well

[randerson]

Thats a good Idea except the doors are different on the mine and the new one has the trap link in back too. I purchased a U channel from Clam and picked it up yesterday there warehouse is incredible looks like there guys are a well oiled machines the way the forklifts are running in there.

[MikeF79]

You can certainly call Clam and place a phone order for the U channel molding. Make sure you tell them you'll need the screws as well. That way you can set up a will call. Clam does their absolute best to attempt to keep stock of the older tent replacements.

Their Customer Service phone is 763-231-4120