Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Walleye Pimp


Guest

Recommended Posts

Went back out on Thursday. I would guess I was fishing by 7 am. Nice and cold and dark but I was a sucker for the fish. I was done fishing w/ limit by 8:30. The south side in 15ft seemed to be the key. Troll east to west and stay in 15 to 16ft. Biggest fish was 21 inches. The perch rap and the perch storm crank worked excellent. This time my dead stick caught as many. Maybe the perch color was the key. If u have a gps let me know and I can get u the coordinates but I will be gone this weekend.

Happy Fishing and send me a report if you go

[email protected]

Link to comment
Share on other sites

Eyewannabe,
We made it out between on Saturday in between the limit of ducks and a limit of rudies. First off I droped my bow mount in and realized my batteries were dead. Pulled out the leadcore and trolled for a few hours across the main basin on the outer fringe of all the boats. Picked up a few smaller eyes but no fast action to speak of. Going to give it another whorl sometime this week.
Shoot me an email if you would mind giving me some more info. I'll take anything that might help me boat another fish. I don't eat or keep very many fish, so the fish I catch usually swim away.
[email protected]

Lake Sinei update
I also made it back out to Sinei one evening this weekend. The warm weather seemed to put a cabosh on the fish I patterned over the last two weeks. I think I might have to put some more time in and figure out a new pattern.
mw

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.