Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Where are the piggies?


smallies24

Recommended Posts

Is it just me or do the bass seem to be scattered all over. I've taken a few nice bass the past couple days (18"-20") but haven't gotten into any numbers. My fish have come out of anywhere from 2-8 ft of water. Are they sittin' deeper already with our warmer weather moving in?

Link to comment
Share on other sites

Go Deep! The past week I have had some awesome success fishing sunken rock piles and underwater points. I have had the best success with crankbaits. The Rapala DT 16 and Down Deep Fat Raps have been great and the depths have been from 12 to 17 feet deep.
I have taken quite a few fish in the 4 to 5 pound class.

Link to comment
Share on other sites

Yep,
Check out my post on this very subject.

They should start moving shallow now that the temps are on the rise.

Be versitile, be aware of whats going on and adapt.

Good luck.

Link to comment
Share on other sites

Thanks for the tips....hit a few deeper points and weed edges last night. I was fishing 7-11 feet of water throwing a combination of shap raps, DT-10's and husky jerks for different depths and I got into the numbers. A lot of 16"-17" fish. Time to refine some techniques and find the REAL big boys, or girls rather.

Anyone been tossing jig 'n' pigs with success lately? I'm thinking that presentation in the same areas might trigger a few nicer fish.

Good fishin'
Brian

Link to comment
Share on other sites

You could definately go with a jig in this situation. I like a football jig for bigger fish. You could also try going to a bigger crankbait like the DT 16, sometimes this will trigger a bigger fish. Getting into the summer months, this should hold especially true.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.