Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

right gear for trout


hookncook

Recommended Posts

I've been spin casting for small stream trout all me life- I've caught a lot of them to the point that it's not even fun anymore.

Off and on over the years, I've picked up the fly rod- but never really too serious until last year's reel recovery retreat- then again at this year's retreat.

I'm going to take some fly lessons during the trout unlimited convention in Oshkosh and am really looking forward to picking up a few pointers there.

But over the winter, I want to really dial in on the gear and make a serious run. SO far I have a TFO 5 wt, and a castaila outdoors 3 wt- but the second is more of a beginner rod...

Link to comment
Share on other sites

What's your target species?.bows, browns, brookies...

Length of rods?..a 8-9 ft 5 wt will be your most versitile rod. It has the ability to finese small dry flies,yet it can punch a moderate sized streamer or nymph/float setup also. Why do say the 3 wt is more of a beginner rod?.often the 3 wt is used for delicate presentations such as small dry flies down to sz.20.which would be more geared for a more advanced angler. What's the size of the stream your fishin. If its a brushy small one stick with a shorter rod like a 7-7.5 ft..if its a big open stream, a longer rod like a 9-10 ft would be benificial.. with a little more info I should be able to help you out more..

Link to comment
Share on other sites

Those are good questions... I'll more than likely start fly fishing in the pasture style HI type streams.. mostly as wide as a sidewalk in most places.

then if I graduate that phase, I'll more than likely focus on the bushier stretches.

Species- multi species.. has to transition between browns and brookies because that's kind of a matra here in this neck of the woods.

I'll more than likely keep my 5wt for bass and pike if I can get myself to learn distance casting.

Link to comment
Share on other sites

Ok..here's how I would set up for a 1 rod only trip. 4 wt rod/reel with extra spools for 3 wt wf floating and 5 wt wf floating..this should handle all spectrums of the trout your seeking. Biengs its wide open I would go with a 8-9 ft long rod. A 4x leader/tippet should prove good enough but don't be afraid to step up or down a size. Remember the smaller the x number the bigger the fly and larger the x number will be smaller fly.. a good rule of thumb is to take the size fly and divide by 3. So a sz. 12 fly will be best suited for a 4x tippet. Again, this is how I would setup..for you the 5 wt would be a good rod to start with for most anything.. keep the 3 wt handy for those times when fish get selective. A great fly to use for any species of trout is the wooly bugger in sizes 8-14 should cover you. I think I covered most if what you were asking..shoot me more if you need to!.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.