Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

looking for a new door

svonasek

By svonasek
in Ice Fishing

 Share

Recommended Posts

svonasek Enthusiast

svonasek

Posted
Posted

I'm looking for advice/recommendations for a replacement door for my fish house. I need a 32x68 door. I'd like to find one with a built in screen door.

We had problems with the door freezing shut. the door in there now is a $130 aluminum cheapie. I think I learned my lesson and am willing to spend a little more this time to get a quality one.

Anyone got any suggestions where to look?

Thanks in advance

Link to comment
Share on other sites
Lip_Ripper Guy Grand Master

Lip_Ripper Guy

Posted
Posted

Bummer. Looks like the same one I have for the new house.

I had one with a screen door in my old house that was a total Pee O S. Because the screen door needs to open outward, there are no seals on the inside of the door. It was like having a window open until I loaded it up with weather stripping. Even so, you have an aluminum frame which conducts cold from outside in, I think there is only so much that can be done.

I believe Clint from Ice Assault was talking about a better quality screen door, so you could maybe check with him.

Link to comment
Share on other sites
svonasek Enthusiast

svonasek

Posted
  • Author
Posted

Its looking like it will be used as camper much more then I originally figured. Which is why I want the screen door. I think I could get by with the door I have if the only concern was it freproblem.ezing. I'd be willing to bet some spray foam in the frame and siliconing the outside lip would take care of that

Link to comment
Share on other sites
SapperACE Rising Star

SapperACE

Posted
Posted

Do a google search on Jake's RV Surplus in Fairmont, MN. I've bought 3 of the rv style doors from them and never had a problem. I think you can get one from them for around $150... Screen door included.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • hugonian1
      Merry Christmas

      By hugonian1 · Posted

      Blessed Christmas to all.  

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept