Help needed getting heater/cooker working

[tsande00]

I have an older knock off heater/cooker that hasn't worked in a few years now. When I turn on the regulator and push the igniter button, no gas comes out.

Could something be plugged up in the line from the regulator to the dispenser? Any ideas on things to try or where to find replacement parts would be appreciated. I replaced the thermocoupler awhile back because it was physically broken and it worked one time in the garage right after but not when I got to the ice.

[Jim Almquist]

By the looks of all the rust, you very well could have a clogged line. Might want to pull the screen off and try to blow some air through to see if it is loose enough to dislodge the clog.

[tsande00]

Update: I found a used MR. Heater on Gregslist for CHEAP. I'm going to part it out and put it on my heater/cooker above. The reason I want to get this old one running is because it puts out much less BTUs and is better suited in a one man flip over than the regular Mr. Heater brand that I use in the 3 man flip.