CrowRiverRat83 Posted September 17, 2011 Share Posted September 17, 2011 Hey guys, I have a 2002 AC 300 4x4 that is starting to leak gas out of the bottom of the carb. It only does it after the machine has been shut off. I tried tightening the drain screw, but it's all the way tight. There is a grease zert looking type of deal on the bottom of the carb, and that's where it's coming from. Any tips? Thanks. Quote Link to comment Share on other sites More sharing options...
ib_jigged Posted September 20, 2011 Share Posted September 20, 2011 You have dirt in the bowl. Open the screw and let some fuel run out and then retighten and see if that helps. Or you can remove the bowl and clean. Quote Link to comment Share on other sites More sharing options...
CrowRiverRat83 Posted September 21, 2011 Author Share Posted September 21, 2011 Yeah, that's kind of what I figured after doing some research. Thanks. Quote Link to comment Share on other sites More sharing options...
works2play Posted October 16, 2011 Share Posted October 16, 2011 I have a 2000 400 cat that leaked a tank of gas on garage floor. Found leaking from the primer. Replaced primer assembly, quit leaking. Quote Link to comment Share on other sites More sharing options...
Carpenter Posted October 18, 2011 Share Posted October 18, 2011 Don't know for sure w/o seeing it, but typically the needle isn't sitting in the seat and the gas is coming out the overflow aka grease zero thing. Bowl has to come off and needle n seat probably need changing. Dennis kirk is usually cost effective and quick to ship. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.