hhguide Posted June 27, 2011 Share Posted June 27, 2011 I'm sure this has been covered but How do I restore or get the black back in my panels or any other black stuff on my Ranger 620 Tiller. Anyone know the best chemicals or sprays. Thanks guys and gals. Quote Link to comment Share on other sites More sharing options...
JohnMickish Posted June 27, 2011 Share Posted June 27, 2011 Run down to Fleet Farm (or your auto parts store) and get this product called "Black Back". It brings the black back, just like it says. I don't know what's in it but its like a mixture of snot and silicone.Another thing that works but not as well are the new synthetic waxes. Quote Link to comment Share on other sites More sharing options...
LMITOUT Posted June 27, 2011 Share Posted June 27, 2011 I got some over spray on the bow pad of my 618T when I was using some Armor All to lube up the trolling motor shaft and it really made it black again where the drops fell. Couldn't believe how black it used to be. I don't think I'm going to use Armor All to finish it off for fear of it being too slippery. Hate to take a header unhooking the boat or deploying the trolling motor. I might try using a product called Bleech White which I use on tires to make them nice and black. You can get that in about any detailing section and you just spray on and wipe down. I don't think it is as slippery as AA but I'm going to try a test area on the dash which has that same dimpled rubber mat material. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.