- 0
-
Your Responses - Share & Have Fun :)
-
got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch.... Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm. Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again. Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out -
-
By The way that didn't work either!! Screw it I'll just use the cellular. -
It’s done automatically. You might need an actual person to clear that log in stuff up. Trash your laptop history if you haven’t tried that already. -
😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I can't get logged in here on my laptop but I can on my cellular 😪
-
I grilled some brats yesterday, maybe next weekend will the next round...
-
You got word censored cuz you said B o o b ies….. haha. Yeah, no… grilling is on hiatus for a bit.
-
Chicken mine, melded in Mccormick poultry seasoning for 24 hours. Grill will get a break till the frigid temps go away!
-
-
we had some nice weather yesterday and this conundrum was driving me crazy so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables, winch ratchet parts, handles, leaf springs etc). I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up. For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight. I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches. I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
-
Question
fiskyknut
Okay, h2oc went kerr-plunk and my right near the half a century old eyes are'nt what they once were so I am thinking of getting a fixed mount 5 inch gps for kicker boat, pontoon and the occasional rental boat. Need internal anntenae and chip compatible unit. This unit will be Red green rigged to jump from boat to boat.
I've had Garmin handhelds of 1 type or another since '93 and like Garmins ease of operation. Leery of Lowrance due to all the internal reciever probs on 520 series.
So I've seen Garmin GPSMap 530's at a realistic price!! 439, and could most likely get Strieffs, my favorite local shop to price match as they've always been good to me as long as they can get one as this model is recently discontinued.
Pros/cons on this Garmin or simular model anyone??
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.