Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Wheelhouse crank system

FWR

By FWR
in Ice Fishing

 Share

Recommended Posts

FWR Enthusiast

FWR

Posted
Posted

Hey guys,

I was looking at Ice Castles in Milaca today and I noticed they do not pin the cable to the leaf springs like some other brands do to raise or lower the house. IC has a bar welded to the top of the leaf springs and that is what the cable is pinned to. The dealer told me this system avoids stressing the springs because the cable is not pulling down on the springs.

Has anybody here had problems with the winch cable pinned directly to the leaf springs? I am looking at other brands beside IC and they pin the cable directly to the springs.

Let me know what you think.

Link to comment
Share on other sites
svonasek Enthusiast

svonasek

Posted
Posted

I guess I don't really see how it would matter if it was attached to the spring.

I don't see any difference in the force put on it to pull it down being any different then the force on the spring when it's pinned and supporting the house.

Link to comment
Share on other sites
MuleShack Grand Master

MuleShack

Posted
Posted

Probably just a scheme so you have to buy springs from them?

Mine has a Nut welded on the end of the spring and the cable loops tru that and have had no issues with the spring breaking. In fact the cable would probably break before the spring would.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • Wanderer
      New boat question

      By Wanderer · Posted

      If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Wanderer
      New boat question

      By Wanderer · Posted

      Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • smurfy
      Time for a smoke

      By smurfy · Posted

      Nords!
    • smurfy
      Time for a smoke

      By smurfy · Posted

    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • smurfy
      What's on the grill

      By smurfy · Posted

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Sketti...  not out of a jar either!
    • SledNeck
      Random Daily Pics

      By SledNeck · Posted

      Lol yeah I watched that
    • Wanderer
      Random Daily Pics

      By Wanderer · Posted

      I went ahead and watched some of the MLF coverage.  Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.   Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept